Description
- RFID Card Support: EM ID Cards or EM Compatible RFID Cards
- Power Requirements: 9-15 V DC at 150 mA
- Interface: Wiegand 26 Interface 125KHz
- Dimension: 80 x 43 x 13 mm / 3.15 x 1.7 x 0.5 in
- Weight: 51 g / 1.81 oz
Specifications
| RFID Card Support | EM ID Cards or EM Compatible RFID Cards |
| Interface: | Wiegand 26 Interface 125KHz |
| Power Requirements: | 9-15 V DC at 150 mA |
| Dimension: | 80 x 43 x 13 mm / 3.15 x 1.7 x 0.5 in |
| Weight: | 51 g / 1.81 oz |
| Frequency: | 125KHz |
| Read range: | Up to 5 cm |
| Compatible RFID cards: | TK4100/EM4100/EM4200 cards |
| Material: | PVC & Resin adhesive |
| Waterproof: | Yes |
| Dustproof: | Yes |
| Audio: | Buzzer Signal Output |
| Visual Indication: | Green and Red LED |
Requirements
This card reader is not a standalone card reader and therefore requires the following
- Wigand access control panel
- Access control power supply
- Electric lock
- Exit button (optional)
Sample usage case
Wiring Schematic
| Colour | Type | Required/Optional | Note |
| Red | DC (+) | Required | Connect to the +12V port on your access control board (see figure 2) |
| Black | Ground (-) | Required | Connect to the GRD port on your access control board (see figure 2) |
| Green | Wiegand Data 0 (D0) | Required | Connect to the D0 port on your access control board (see figure 2) |
| White | Wiegand Data 1 (D1) | Required | Connect to the D1 port on your access control board (see figure 2) |
| Grey | Beeper | Optional | To activate the beep function of this reader, connect this wire to the Black (ground) wire |
| Purple | Wiegand 32-bit | Not-required for 26-bit
Required for 34-bit |
Only use to activate 34-bit Wiegand. To activate 34-bit Wiegand, connect this wire to the Black (ground) wire |
Documentation
